< Back to Elpha II 3000

Before you buy any other muscle stimulator, compare it to the Elpha II 3000 

	Elpha II 3000	Competitor Specifications
2 output channels
Individual stimulation mode selectable for each channel
0-100 mA constant current output
Full output capability at a skin resistance up to 2500 Ohms
40 hours battery lifetime at 30 mA TENS + 30 mA BURST
Continuous TENS stimulation  (freq: 1-150 Hz / Pulsewidth: 50-250 µSec / Level 0-60 mA)
TENS stimulation with constant I*t modulation (Freq:  1-150 Hz / Pulsewidth:  70-200  µSec / Level: 0-48 mA)
BURST stimulation (Freq: 0.5-5.0 Hz / Pulsewidth:  50-250   µSec / Level 0-60 mA)
MUSCLE stimulation (Freq:  2-100 Hz / Pulsewidth 100-400 µSec / Risetime:  0.5-2.0 Sec / T_on:  2-20 Sec / T_off: T_on-20Sec)
Time staggered, 2 channel, function MUSCLE stimulation (Ch. B T_on:  <=Ch.A T_on / Ch.B delay:  <=Total cycle time for Ch. A)
Programmable treatment time for each mode and each channel (5-95 minutes + continuous)
Programming of all parameters in each mode and each channel
Memory for all pre-sets made by user
Digital display of all parameters, warnings and indications
Warning at low battery condition
Warning at high skin resistance / bad electrodes
Indication of end of treatment when using timer function
Secured against unexpected stimulation
Secured against accidental increase of level
Automatic stimulation-stop in case of patient disconnection
Automatic check of all safety parameters during every power-on
Factory settings selectable by user
Built-in belt clip
Pocket size
Carrying case holding device and all accessories
Extremely durable and flexible electrode cables
Re-usable self adhesive and pre-gelled electrodes included
Meets the most extreme international safety regulations
Ability to lock and unlock parameters
Compliance monitor showing cumulative treatment time
Cumulative energy timer
	Total Score 31

< Back to Elpha II 3000

sales@biomation.com
Toll Free: 1.888.667.2324