Portable Electrical Stimulators

High Voltage Pulsed Current (HVPC) for wound healing, increased blood flow and pain reduction.

 


GeniStim 330 TM Galvanic Stimulator


The GeniStim 330 is an easy-to-use, two-channel HVPC stimulator suited to a range of physiological applications including wound healing, increased blood circulation and pain reduction. A convenient timer permits automatic shut-off at the end of the therapy session.

It has two output channels, each with its own amplitude control for treating two locations at the same time. Controls are housed in a transparent cover to prevent inadvertent altering of the settings during treatment.

Specifications

• Channels: Two active output, one dispersive return

• Cycle: Continuous or alternating

• On Time: 7 seconds fixed in alternating mode, continuous in continuous mode.

• Wave Form: Pulsed galvanic monophasic exponen- tial spikes, delivered in pairs with a fixed interpulse interval of 100 micoseconds.
• Treatment timer: 60 minutes, 15 on/45 off, continuous
• Frequency: 1 - 100 Hz
• Output voltage: 0 - 330 V, adjustable
• Power Source: Two 9 volt batteries or AC operation
• Polarity: Positive or negative
• Compliance meter: Records total usage time minutes.

Can be reset. 


GeniStim 330 TM Galvanic Stimulator

 


The Pulse-Stim 240 is a light-duty single-channel stimulator for wound healing and for home treatment of pain and poor blood circulation. Its two active output leads can be used for continuous stimulation, or alternating between the two leads.

• Channels: Single channel.
• Cycle: Continuous or alternating
• Wave Form: Twin peak, monophasic
• Polarity: Positive or negative
• Frequency: 2 - 100 Hz
• Output Voltage: 0 - 240 volts (single channel 500 Ohm load) 0 to 350 volts (open circuit)
• Pulse Duration: 5 microseconds
• IntraPulse Interval: 100 microseconds
• Power Souce: 9 volt alkaline or rechargeable battery

A sliding cover provides access to the controls and to the battery.

TM GeniStim and Pulse Stim are trademarks of Biomation.