To make the best use of the foot switch system, you should use Megawin (Windows 95/98) or Multisignal (DOS) software.
For
gait analysis, the foot switch system shows precise contact and release
times while monitoring EMG muscle activities.
|
The foot switch system is an accessory for the ME-3000P muscle tester system. It uses two channels, with the right foot on one channel and the left foot on the other channel. On each channel there are 4 distinct output levels to record heel, toe, both or none. The entire surface of the sensor is sensitive to minimize the effect of any positioning differences when applying the sensors. The sensing threshold pressure is non-adjustable but may be altered somewhat by adding padding layers if needed. |
| A
double preamplifier cable is included. It plugs directly into one
of the input connectors of the ME-3000P. If using an 8-channel ME-3000P-8
processor, a “Y” cable will be needed for connecting the foot switch.
To make the best use of the foot switch system, you should use Megawin (Windows 95/98) or Multisignal (DOS) software. For
gait analysis, the foot switch system shows precise contact and release
times while monitoring EMG muscle activities. |
|
